Top 9 Rack Lock Key UK – Computer & Server Racks

As an Amazon Associate I earn from qualifying purchases.

1. Tripp Lite

#ad

Tripp Lite Replacement Lock Rack Enclosure Server Cabinet, Compatible with SmartRack Enclosures, Version 3 SRHANDLE3, 2 Keys

#ad
Tripp Lite #ad - Call them at 773-869-1234 m-F 8am-6pm CST. Our chicago-based tech support Team is ready to assist you with any warranty assistance, trouble-shooting techniques or configuration help. Keys – version 3: includes 2 keys specific to this model to give you control over who has access.

Compatibility: srhandle3 fits smartrack enclosure door assemblies equipped with handles. 5 year warranty & free tech support: tripp lite warrants this product to be free from original defects in material and workmanship for the duration of the warranty. Provide keys to specific personnel to limit access to certain rack enclosures. Lock handle kit: replacement lock handle kit with included keys allow facility and IT managers to designate authorized access to rack cabinets.

Applications: prevent unauthorized access to rack-mounted equipment in your data center, server room or network closet. Keys and handles are marked with the numeral “3” for quick identification. Replacement handles for front and rear doors are included, which replace the rack cabinet’s existing door handles using the original mounting hardware. If the product should prove defective in that time, Tripp Lite will gladly repair or replace it.
BrandTripp Lite #ad
ManufacturerTRIPP LITE #ad
Height16 cm (6.3 Inches)
Length3.89 cm (1.53 Inches)
Weight0.47 kg (1.04 Pounds)
Width3.61 cm (1.42 Inches)
Part NumberSRHANDLE3
ModelSRHANDLE3

2. Tripp Lite

#ad

2 Keys, Compatible with SmartRack Enclosures, Tripp Lite Replacement Lock Rack Enclosure Server Cabinet, Version 4 SRHANDLE4

#ad
Tripp Lite #ad - Our chicago-based tech support Team is ready to assist you with any warranty assistance, trouble-shooting techniques or configuration help. Call them at 773-869-1234 m-F 8am-6pm CST. Replacement handles for front and rear doors are included, which replace the rack cabinet’s existing door handles using the original mounting hardware.

5 year warranty & free tech support: tripp lite warrants this product to be free from original defects in material and workmanship for the duration of the warranty. Provide keys to specific personnel to limit access to certain rack enclosures. Keys – version 4: includes 2 keys specific to this model to give you control over who has access. Keys and handles are marked with the numeral “4” for quick identification.

If the product should prove defective in that time, Tripp Lite will gladly repair or replace it. Compatibility: srhandle4 fits smartrack enclosure door assemblies equipped with handles. Applications: prevent unauthorized access to rack-mounted equipment in your data center, server room or network closet. Lock handle kit: replacement lock handle kit with included keys allow facility and IT managers to designate authorized access to rack cabinets.
BrandTripp Lite #ad
ManufacturerTRIPP LITE #ad
Height16 cm (6.3 Inches)
Length3.89 cm (1.53 Inches)
Weight0.47 kg (1.04 Pounds)
Width3.61 cm (1.42 Inches)
Part NumberSRHANDLE4
ModelSRHANDLE4

3. I-CHOOSE LIMITED

#ad

I-CHOOSE LIMITED Gembird 4U 19" Rack Patch Network Data Comms Server Cabinet | Chassis Case with Keys | 300mm Deep | Removable Side Panels | Built-in Lock | Upper and Lower Cable Entry Points

#ad
I-CHOOSE LIMITED #ad - Featuresupper and lower cable entry points. Box weight 9. 18kgs. Individual boxlxwxh 570x 320x290 mm. Manufacturer code19a-pcaB-01. 4u 19" server chassis case supplied with keys. Product info4u 19" rack patch network Data Comms Server Cabinet. Featuresremovable side doors for easy access. Featuresdoor with built-in lock. Dimensions300 mm deepness.
BrandI-CHOOSE LIMITED #ad
ManufacturerI-CHOOSE LIMITED #ad
Part NumberIC-RACK-GMB-PATCH-19A-PCAB-01

4. Kingwin

#ad

Kingwin Single Bay 3.5-Inch Internal SATA Trayless Hot Swap Rack with Key Lock KF-1000-BK

#ad
Kingwin #ad - Convenient - Driver-free support and Supports hot swap. Led indicator - led light for power and HDD activity. Safety - metal key lock and 1. 0 mm guide wire for slim HDD. Simplicity - easy open latch door, No inner tray required, and Tool-less design for HDD installation.
BrandKingwin #ad
ManufacturerKingWin #ad
Height4.2 cm (1.65 Inches)
Length14.6 cm (5.75 Inches)
Weight0.45 kg (0.99 Pounds)
Width18.2 cm (7.17 Inches)
Part NumberKF-1000-BK
ModelKF-1000-BK

5. I-CHOOSE LIMITED

#ad

External Height 751mm, Bottom & Rear Cable Entries | Width 530mm, 15U 450mm Deep Wall Mounted or Floor Standing Rack Network Comms Cabinet | Lockable Front & Side Doors | Top, Depth 450mm

#ad
I-CHOOSE LIMITED #ad - An economic solution for a floor mount cabinet. Brush platesno more gaping holes! and no more ingress of dust. Knockoutsall convicabs have knockouts on the top, bottom and rear. Standard wall mounted cabinets have been re-engineered for quick conversion to a floor standing version, when/if required. The back-mount surface brush plate incorporates a smooth ledge so that the cables are not resting on the actual cabinet edge, reducing possible damage to the cabling when floor mounting, hence the 10mm depth of the plate.

Please notebrush top, brush backs and the 4-Set of Castors must be purchased seperately and are not included with the racks. Convertible conviniencethe convicab concept is, in a nutshell, ‘convertible convenience’. The size of the knockouts have been designed to enable a CAT5e or CAT6 patch panel removed from another device to be pulled through, saving the re-punching of the cables back in again.

Wall mounting or floor standingre-calibrated for strength, the floor section has been made suitable to accept four castors along with a range of accessories that are specially designed to accommodate both wall and floor scenarios. The top mounted surface 5mm deep brush plate has been designed with the back edge open so that it can be attached after the cables have been pulled through the knockout. The 9u has one rear knockout in the centre and the 12 and 15U both have two rear knockouts near the top and bottom. There are six models available in 9U, 12 and 15U and either 450 or 600mm depth.
BrandI-CHOOSE LIMITED #ad
ManufacturerI-CHOOSE LIMITED #ad
Part NumberIC-RACK-PATB-CONVI-DC15U/450F15U

6. OImaster

#ad

OImaster 4 Bays 2.5 Inch SATA HDD SSD Hard Drive Mobile Rack Backplane with Key Lock Locker Function Support Hot-swap 6Gbps Transmission for 5.25 Inch Drive Bay

#ad
OImaster #ad - All metal construction: solid and durable, great in heat dissipation. Indicator light for each bay: the statuses of your hard disks are clearly showed. Standard sata interface: works for 7mm-15mm 2. 5inch sata / SSD. Supporting hot plug, effortless to install the disk. Ultra-fast transfer speed: up to 6Gpbs transmission speed.
BrandOImaster #ad
Part NumberYNZ1205164791273PX
Model.

7. SilverStone Technology

#ad

Aluminium Trayless Hot Swap Mobile Rack Backplane / Internal Hard Drive Enclosure for 4x 2.5 Inch SAS/SATA HDD or SSD, fit in any 5.25 Inch Drive Bay, with Fan and Lock, black, SilverStone SST-FS204B

#ad
SilverStone Technology #ad - All aluminium body with beautiful hairline brushed finish. Fits four 2. 5" sas/sata 6gbit/s drives in one 5. 25" device bay. Individual metal key lock for each drive for extra security. Independent drive status LED. Built-in cooling fan for excellent heat dissipation.
BrandSilverStone Technology #ad
ManufacturerSilverStone Technology #ad
Height4.17 cm (1.64 Inches)
Length18 cm (7.09 Inches)
Weight0.67 kg (1.48 Pounds)
Width14.6 cm (5.75 Inches)
Part Number71094
Model71094
Warranty24 months

8. SilverStone Technology

#ad

Aluminium Trayless Hot Swap Mobile Rack Backplane / Internal Hard Drive Enclosure for 12x 2.5 Inch SAS/SATA HDD or SSD, with Fan and Lock, fit in any 3x 5.25 Inch Drive Bay, black, SilverStone SST-FS212B

#ad
SilverStone Technology #ad - Individual metal key lock for each drive for extra security. All aluminum body with beautiful hairline brushed finish. Fits twelve 2. 5" sas/sata 6gbit/s drives in three 5. 25" device bay.
BrandSilverStone Technology #ad
ManufacturerSilverStone Technology #ad
Height12.7 cm (5 Inches)
Length16.4 cm (6.46 Inches)
Weight1.52 kg (3.35 Pounds)
Width14.6 cm (5.75 Inches)
Part Number71096
Model71096

9. I-CHOOSE LIMITED

#ad

I-CHOOSE LIMITED 4U Rackmount Computer Chassis Case | 500mm Deep | V2 Butterfly Lock | ATX | 9x 3.5 HDDs | 3x 2.5 SDDs/HDDs | 3x Fans Included

#ad
I-CHOOSE LIMITED #ad - Featuresthe 500mm rackmount comes with 2 x 80mm fans at the back and a 1 x 120mm fan at the front. Product info4u rackmount computer chassis case | 500mm deep | v2 butterfly lock | atX | 9x 3.

5" hdds | 3x 2. 5" sdds/hdds | 3x Fans Included. Info4u v2 500mm rackmount is a computer chassis featuring a number of different power form factor and storage device options. Featuresa spacious interior provides sufficient room to accommodate your powerful hardware, 3 x 5. 25"" odds and seven expansion slots, such as ATX motherboards and up to 9 internal 3. 5"" hdds, so users can expand your server system easily. Lockablethe front door with key lock delivers confident protection against unauthorised access and theft, for a great peace of mind.
BrandI-CHOOSE LIMITED #ad
ManufacturerI-CHOOSE LIMITED #ad
Part NumberIC-RACK-AONE-CSCG4U500V2B